Viper (Six Flags Great America) facts for kids

Quick facts for kids Viper
An aerial photo of a train on Viper's lift hill, as seen prior to the addition of Hurricane Harbor.
Six Flags Great America
Location	Six Flags Great America
Park section	Southwest Territory
Coordinates	42°22′05″N 87°56′14″W / 42.36806°N 87.93722°W / 42.36806; -87.93722
Status	Open
Opening date	April 29, 1995
General statistics
Type	Wood
Manufacturer	Six Flags
Designer	Six Flags
Track layout	Coney Island Cyclone (mirror image)
Lift/launch system	Chain lift hill
Height	100 ft (30 m)
Drop	80 ft (24 m)
Length	3,458 ft (1,054 m)
Speed	50 mph (80 km/h)
Inversions	0
Duration	1:45
Max vertical angle	53°
Capacity	1000 riders per hour
G-force	3.6
Height restriction	48 in (122 cm)
Trains	2 trains with 5 cars. Riders are arranged 2 across in 3 rows for a total of 30 riders per train.
Flash Pass Available
Must transfer from wheelchair
Viper at RCDB

Viper is a wooden roller coaster located at Six Flags Great America in Gurnee, Illinois, which opened in 1995. Viper is a clone of the Coney Island Cyclone and is the only roller coaster ever to be built directly by Six Flags. Viper is also the only wooden roller coaster with this name (all other roller coasters named Viper, both operating and not, have been steel roller coasters). It was built by Rygiel Construction.

Overview

Viper as seen just before dusk

Throughout the years, Viper's queue has undergone numerous modifications to accommodate additions such as the addition of Raging Bull directly south of the ride and the entrance to the adjacent Hurricane Harbor water park directly west of the ride. Unlike most Cyclone clones, Viper provides a much smoother ride than the original Cyclone.

During its first year of operation, Viper was located in Hometown Square. With the opening of Southwest Territory in 1996, Viper was officially made part of Southwest Territory, where it and Raging Bull are the anchor attractions.

On May 24, 2013, the park announced that Viper would be one of three coasters running backwards for the first time during 2013 season for a limited time along with Batman: The Ride and American Eagle (which wasn't going backwards for the first time) .

Ride experience

Riders enter Viper from Southwest Territory. After winding through an outdoor queue passing under parts of Raging Bull, guests enter the station and board the 30-passenger PTC trains, each composed of five three-bench cars that seat six riders each. These trains are the same model as the trains on American Eagle, but painted green to resemble a snake.

Layout

Upon leaving the station, trains make a slight left hand turn, followed by a straight segment of track. This leads into another left hand turn and trains then climb the 100-foot-tall (30 m) lift hill. At the top, the track drops at a 53-degree angle. The maximum speed may vary between 50 and 55 miles per hour (80 and 88 km/h) depending on the weather conditions, time of day and the load. Next the train rises into a right hand turn around. This turn around leads to a sharp second drop, before rising over another hill and passing through a left hand second turn around. The second turn around has a double down element as riders descend another drop into the wooden structure. The ride makes another out and back run, and after the final turn around, hits the brake run, ending the ride.

Viper's overall layout is a mirror image of the Coney Island Cyclone, however, the approach to the lift hill is much longer and the final turn leads into a straight brake run leading directly into the station. The second turn around also is a direct gradual ascent, peaking at the middle, before leading into a double down drop.

Awards