Ore facts for kids

Iron ore (banded iron formation)

Manganese ore – psilomelane (size: 6.7 × 5.8 × 5.1 cm)

Lead ore – galena and anglesite (size: 4.8 × 4.0 × 3.0 cm)

Gold ore (size: 7.5 × 6.1 × 4.1 cm)

Cart for carrying ore from a mine on display at the Historic Archive and Museum of Mining in Pachuca, Mexico

An ore is a mineral which has a metal inside it. Ores are usually extracted by being mined. They can sometimes be found on the Earth's surface. The metal in ore is often valuable. There are different ways to get the metal out of the ore. Iron ore, for example, is smelted in a blast furnace.

Ore deposits

An ore deposit is an accumulation of ore. This is distinct from a mineral resource as defined by the mineral resource classification criteria. An ore deposit is one occurrence of a particular ore type. Most ore deposits are named according to their location (for example, the Witwatersrand, South Africa), or after a discoverer (e.g. the Kambalda nickel shoots are named after drillers), or after some whimsy, a historical figure, a prominent person, something from mythology (phoenix, kraken, serepentleopard, etc.) or the code name of the resource company which found it (e.g. MKD-5 was the in-house name for the Mount Keith nickel sulphide deposit).

Classification

Ore deposits are classified according to various criteria developed via the study of economic geology, or ore genesis. The classifications below are typical.

Hydrothermal epigenetic deposits

• Mesothermal lode gold deposits, typified by the Golden Mile, Kalgoorlie
• Archaean conglomerate hosted gold-uranium deposits, typified by Elliot Lake, Ontario, Canada and Witwatersrand, South Africa
• Carlin–type gold deposits, including;
• Epithermal stockwork vein deposits

Granite related hydrothermal

• IOCG or iron oxide copper gold deposits, typified by the supergiant Olympic Dam Cu-Au-U deposit
• Porphyry copper +/- gold +/- molybdenum +/- silver deposits
• Intrusive-related copper-gold +/- (tin-tungsten), typified by the Tombstone, Arizona deposits
• Hydromagmatic magnetite iron ore deposits and skarns
• Skarn ore deposits of copper, lead, zinc, tungsten, etcetera

Magmatic deposits

• Magmatic nickel-copper-iron-PGE deposits including
  • Cumulate vanadiferous or platinum-bearing magnetite or chromite
  • Cumulate hard-rock titanium (ilmenite) deposits
  • Komatiite hosted Ni-Cu-PGE deposits
  • Subvolcanic feeder subtype, typified by Noril'sk-Talnakh and the Thompson Belt, Canada
  • Intrusive-related Ni-Cu-PGE, typified by Voisey's Bay, Canada and Jinchuan, China
• Lateritic nickel ore deposits, examples include Goro and Acoje, (Philippines) and Ravensthorpe, Western Australia.

Volcanic-related deposits

A cross-section of a typical Volcanic hosted massive sulfide|volcanogenic massive sulfide (VMS) ore deposit

• Volcanic hosted massive sulfide (VHMS) Cu-Pb-Zn including;
  • Examples include Teutonic Bore and Golden Grove, Western Australia
    • Besshi type
    • Kuroko type

Metamorphically reworked deposits

• Podiform serpentinite-hosted paramagmatic iron oxide-chromite deposits, typified by Savage River, Tasmania iron ore, Coobina chromite deposit
• Broken Hill Type Pb-Zn-Ag, considered to be a class of reworked SEDEX deposits

Carbonatite-alkaline igneous related

• Phosphorus-tantalite-vermiculite (Phalaborwa South Africa)
• Rare earth elements – Mount Weld, Australia and Bayan Obo, Mongolia
• Diatreme hosted diamond in kimberlite, lamproite or lamprophyre

Sedimentary deposits

Magnified view of banded iron formation specimen from Upper Michigan. Scale bar is 5.0 mm.

• Banded iron formation iron ore deposits, including
  • Channel-iron deposits or pisolite type iron ore
• Heavy mineral sands ore deposits and other sand dune hosted deposits
• Alluvial gold, diamond, tin, platinum or black sand deposits
• Alluvial oxide zinc deposit type: sole example Skorpion Zinc

Sedimentary hydrothermal deposits

• SEDEX
  • Lead-zinc-silver, typified by Red Dog, McArthur River, Mount Isa, etc.
  • Stratiform arkose-hosted and shale-hosted copper, typified by the Zambian copperbelt.
  • Stratiform tungsten, typified by the Erzgebirge deposits, Czechoslovakia
  • Exhalative spilite-chert hosted gold deposits
• Mississippi valley type (MVT) zinc-lead deposits
• Hematite iron ore deposits of altered banded iron formation

Astrobleme-related ores

• Sudbury Basin nickel and copper, Ontario, Canada

Extraction

Some ore deposits in the world

Some additional ore deposits in the world

The basic extraction of ore deposits follows these steps:

1. Prospecting or exploration to find and then define the extent and value of ore where it is located ("ore body")
2. Conduct resource estimation to mathematically estimate the size and grade of the deposit
3. Conduct a pre-feasibility study to determine the theoretical economics of the ore deposit. This identifies, early on, whether further investment in estimation and engineering studies is warranted and identifies key risks and areas for further work.
4. Conduct a feasibility study to evaluate the financial viability, technical and financial risks and robustness of the project and make a decision as whether to develop or walk away from a proposed mine project. This includes mine planning to evaluate the economically recoverable portion of the deposit, the metallurgy and ore recoverability, marketability and payability of the ore concentrates, engineering, milling and infrastructure costs, finance and equity requirements and a cradle to grave analysis of the possible mine, from the initial excavation all the way through to reclamation.
5. Development to create access to an ore body and building of mine plant and equipment
6. The operation of the mine in an active sense
7. Reclamation to make land where a mine had been suitable for future use

Trade

Ores (metals) are traded internationally and comprise a sizeable portion of international trade in raw materials both in value and volume. This is because the worldwide distribution of ores is unequal and dislocated from locations of peak demand and from smelting infrastructure.

Most base metals (copper, lead, zinc, nickel) are traded internationally on the London Metal Exchange, with smaller stockpiles and metals exchanges monitored by the COMEX and NYMEX exchanges in the United States and the Shanghai Futures Exchange in China.

Iron ore is traded between customer and producer, though various benchmark prices are set quarterly between the major mining conglomerates and the major consumers, and this sets the stage for smaller participants.

Other, lesser, commodities do not have international clearing houses and benchmark prices, with most prices negotiated between suppliers and customers one-on-one. This generally makes determining the price of ores of this nature opaque and difficult. Such metals include lithium, niobium-tantalum, bismuth, antimony and rare earths. Most of these commodities are also dominated by one or two major suppliers with >60% of the world's reserves. The London Metal Exchange aims to add uranium to its list of metals on warrant.

The World Bank reports that China was the top importer of ores and metals in 2005 followed by the US and Japan.

Important ore minerals

Images for kids

• 

  Iron ore (Banded iron formation, Minnesota) consisting of magnetite as main ore mineral (silver-grey bands) and quartz as main gangue mineral (light and red bands). The red bands contain also hematite; most of it, otherwise a valuable iron ore mineral, cannot be recovered economically because it is finely intergrown with quartz

See also

In Spanish: Mena (minería) para niños