Menai Suspension Bridge facts for kids

Quick facts for kids Menai Bridge Pont Grog y Borth
The Menai Suspension Bridge from a viewpoint on the A5 near the Britannia Bridge.
Carries	2 lanes of A5 (Great Britain), cyclists and pedestrians
Crosses	Menai Straits
Locale	Anglesey, North Wales
Heritage status	Grade 1 Candidate: World Heritage Site
Characteristics
Design	Suspension Bridge
Material	Wrought Iron Stone
Total length	417 metres (1,368 ft)
Width	12 metres (39 ft)
Height	30 metres (98 ft)
Longest span	176 metres (577 ft)
Number of spans	Main: One Arches: Eight
Piers in water	Five
Design life	1893: wooden deck replaced in steel 1938/40: iron chains replaced in steel.
History
Designer	Thomas Telford
Construction begin	1819
Opened	30 January 1826

The Menai Suspension Bridge (Welsh: Pont Grog y Borth) is a suspension bridge in Wales. It runs from the island of Anglesey to Holyhead. It was designed by Thomas Telford. They started building it in 1819 and it was finished in 1826.

Building of the bridge

Before the bridge was built, the only way people could get to Anglesey island was by a ferry from Holyhead. The water of the Menai Strait is very rough and dangerous, so it was hard for people to use their own boats or swim to the island. The people who lived on Anglesey sold cattle that they raised. The cattle were forced to swim through the dangerous water, with many of them often dying. If the cows survived the trip, they were sent to London and other places to be sold.

An engineer named Thomas Telford was working near Holyhead when he thought it would be a good idea to build a suspension bridge to Anglesey. A suspension bridge was big enough that tall ships could go underneath them. He asked the British Parliament if he could build the bridge and they said yes.

Telford designed the bridge. They started building it in 1819. The first thing to be built were the towers that are on both sides at Holyhead and Anglesey. The towers were made out of limestone from Penmon. They were hollow inside. After the towers were built, 16 chains were installed. They were made out of 935 bars of iron. They were long enough to support the 176-metre (577 ft) long bridge. Iron can rust. So, the people who made the chains soaked them in linseed oil and the painted. The chains were 522.3 metres (1,714 ft) long and weighed 121 tons. The bridge opened on January 30, 1826.

Bridge improvements

Menai Suspension bridge being painted in August 2005

The road that went over the bridge was not very safe because of the strong winds. Workers made the bridge stronger in 1840. The bridge road was made of wood, and in 1893 it was replaced with steel. The bridge only allowed cars and trucks that weighted up to 4.5 tons to go over the bridge. This made it hard for big trucks to bring goods to the island. In 1938 they installed wrought iron chains to make the bridge strong. In 1999, the bridge closed for one month. The road was fixed and the bridge was made stronger. When it was closed, people had to drive over the Britannia Bridge to get to the island.

One part of the bridge was closed for six months starting on February 28, 2005. The bridge was painted for the first time in 65 years. It was reopened on December 11.

Surroundings

The Anglesey Coastal Path goes under the bridge. There is a memorial to the Aberfan disaster victims at the bridge on Anglesey.

Popular culture

The closest town to the bridge is called Menai Bridge. British one pound coins have drawings of the bridge. The coins were made in 2005. The bridge is mentioned in Through the Looking-Glass by Lewis Carroll.

Images for kids

• 

  A plan of the bridge made in 1820, during its construction. Note the depiction of iron towers above the road deck, and a central walkway.

• 

  1840 lithograph of the bridge

• 

  The bridge c. 1880, showing the original cable configuration prior to the installation of steel cables in 1938

See also

In Spanish: Puente colgante de Menai para niños