Margaret Hunt Hill Bridge Facts for Kids

Quick facts for kids Margaret Hunt Hill Bridge
The inaugural lighting of the Margaret Hunt Hill Bridge
Coordinates	32°46′48″N 96°49′20″W / 32.7800°N 96.8221°W / 32.7800; -96.8221
Carries	Spur 366
Crosses	Trinity River
Locale	Dallas, Texas
Characteristics
Design	Cable-stayed bridge
Height	400 feet (120 m) central arch pylon
Longest span	1,197 feet (365 m) (total length 1,870 feet (570 m))
History
Designer	Santiago Calatrava
Opened	March 29, 2012; 12 years ago (March 29, 2012)
Statistics
Toll	None

The Margaret Hunt Hill Bridge is a bridge in Dallas, Texas, that spans the Trinity River. The bridge is named for Margaret Hunt Hill, an heiress and philanthropist. The bridge was constructed as part of the Trinity River Project. Designed by Santiago Calatrava, it is one of three such bridges planned to be built over the Trinity; the second, the Margaret McDermott Bridge, is completed; the third cancelled. The span parallels the Ronald Kirk Bridge, a walking bridge that was previously the Continental Avenue bridge.

History
Architecture
Gallery
See also

History

The bridge, which opened in March 2012, is the first of a series of bridges that the office of Santiago Calatrava designed to span the Trinity River in downtown Dallas. The bridge connects Spur 366 (Woodall Rodgers Freeway) in downtown to Singleton Boulevard in West Dallas. Construction on the bridge began in December 2005. The bridge cost $117 million to build. A Dallas Morning News analysis put the project's total cost at $182 million. Beginning in 2004, The Trinity Trust Foundation successfully worked to secure private funds in support of the Trinity River Corridor Project, including the Margaret Hunt Hill Bridge, Margaret McDermott Bridge, Ronald Kirk Bridge, trails and other components of the project.

On June 26, 2010, the signature 40-story center-support arch was topped with a central curved span, which can now be seen from many miles away in several directions. The arch provides an additional feature to the Downtown Dallas skyline.

In 2012, the bridge received an Outstanding Civil Engineering Achievement Award from the Texas section of the American Society of Civil Engineers. The bridge also received a 2012 European Convention for Constructional Steelwork Award For Steel Bridges.

On June 1, 2020 at approximately 9:00 PM, several hundred protesters marching on the bridge were arrested in a kettling maneuver when Dallas Police routed the protest onto the bridge, blocked in the demonstration on both sides, fired teargas and pepper balls into the nonviolent crowd, then detained all protesters on the bridge for several hours. On June 4, Dallas Police Chief U. Reneé Hall announced that the protesters would not be charged following several days of attention and backlash from community members, political figures, local news outlets, and activist groups.

Architecture

The cable-stayed bridge supports its 1,870 feet (570 m) length and 1,197 feet (365 m) main span with a steel arch whose peak's height is 400 feet (122 m). An array of twisting cables connect the underside of the arch's curved pylon to the bridge's platform. Fifty-eight (58) white strands descend from the arch and secure themselves along the centerline of the platform. The 16 feet (4.9 m) diameter support is composed of 25 individual segments, secured with 20,000 pounds (9,100 kg) of bolts and additional 450 tons (408,233 kg) of concrete. The bridge provides six lanes for vehicular traffic.

The bridge closely resembles two of three bridges constructed in 2005-2006 above the Autostrada A1 motorway and connecting roads in Reggio Emilia, Italy, that Calatrava had earlier designed. In 2009, the European Convention for Constructional Steelwork gave the two bridges a European Steel Design Award, stating that the structures' original visual effects at different angles give the bridges "the aspect of huge musical instruments."