Little Thetford flesh-hook facts for kids
Quick facts for kids Little Thetford flesh hook |
|
---|---|
Material | Bronze |
Size | Hooked part length:12 in (30 cm) weight:9 oz (255 g) Butt end length:6 in (15 cm) weight:4 oz (113 g) |
Created | late Bronze Age (1150 – 950 BC) |
Discovered | 1929, Little Thetford |
Present location | British Museum |
Identification | CHER 06956 |
The Little Thetford flesh-hook is a late Bronze-Age (1150 – 950 BC) artefact discovered in 1929 in Little Thetford, near Ely, Cambridgeshire, England. A flesh-hook is a metal hook with a long handle used to pull meat out of a pot or hides out of tan-pits. This particular find is one of 32 other such archaeologically significant finds, scatters, and excavations within 1 square mile (2.6 km2) of Little Thetford.
Contents
Discovery
The artefact was found by a Mr. Dresser, whilst digging a ditch on reclaimed fenland, at Little Thetford in 1929. Discovered about 9 feet (2.7 m) down, it consisted of two-parts, connected by the remains of a wooden shaft. The wood remains have not survived; a contemporary wooden shaft has been added by the British Museum for display purposes. The artefact is in the British Museum though is not, as of 2012, on display. Within 1 square mile (2.6 km2) of Little Thetford, there have been 33 finds of various kinds over the years, such as flints from the Neolithic era through to a windmill of the late Medieval period.
Uses
The word flesh-hook is relatively modern. The OED gives the origin of the word as 1325 AD, and defines it as a metal hook with a long stail, used to pull hides out of tan-pits or as a hook for pulling meat from the pot. It may also have been used as a tool to prod animals. The use of this flesh-hook in the Bronze Age can only be speculated.
Construction
The metal used in the construction is a bronze alloy, found to be typical of the late Bronze Age. The material was analysed using ICP – AES and contained (approximately) 85% copper, 10% tin, 3% lead, and 2% impurities; although the constituents of the individual parts varied around these figures. From an analysis of 36 other Bronze-Age flesh-hooks known to be in existence, the assembled length of hook-part, butt-end, and missing wood part is speculated to be 2.5 feet (0.76 m).
The artefact was manufactured by casting, using a mould in a lost-wax (cire perdue) process.
Dating
The British Museum dates the artefact within the Bronze Age 1150 – 950 BC. The Cambridgeshire Historic Environment Record database dates the artefact as late Bronze Age 1000–701 BC.