kids encyclopedia robot

Isosceles triangle facts for kids

Kids Encyclopedia Facts
Isosceles triangle

In geometry, an isosceles triangle is a triangle that has two sides of equal length. Sometimes it is specified as having two and only two sides of equal length, and sometimes as having at least two sides of equal length, the latter version thus including the equilateral triangle as a special case. Examples of isosceles triangles include the isosceles right triangle, the golden triangle, and the faces of bipyramids and certain Catalan solids.

The mathematical study of isosceles triangles dates back to ancient Egyptian mathematics and Babylonian mathematics. Isosceles triangles have been used as decoration from even earlier times, and appear frequently in architecture and design, for instance in the pediments and gables of buildings.

The two equal sides are called the legs and the third side is called the base of the triangle. The other dimensions of the triangle, such as its height, area, and perimeter, can be calculated by simple formulas from the lengths of the legs and base. Every isosceles triangle has an axis of symmetry along the perpendicular bisector of its base. The two angles opposite the legs are equal and are always acute, so the classification of the triangle as acute, right, or obtuse depends only on the angle between its two legs.

Formulas

Height

For any isosceles triangle, the following six line segments coincide:

  • the altitude, a line segment from the apex perpendicular to the base,
  • the angle bisector from the apex to the base,
  • the median from the apex to the midpoint of the base,
  • the perpendicular bisector of the base within the triangle,
  • the segment within the triangle of the unique axis of symmetry of the triangle, and
  • the segment within the triangle of the Euler line of the triangle, except when the triangle is equilateral.

Their common length is the height h of the triangle. If the triangle has equal sides of length a and base of length b, the general triangle formulas for the lengths of these segments all simplify to

h=\sqrt{a^2-\frac{b^2}{4}}.

This formula can also be derived from the Pythagorean theorem using the fact that the altitude bisects the base and partitions the isosceles triangle into two congruent right triangles.

The Euler line of any triangle goes through the triangle's orthocenter (the intersection of its three altitudes), its centroid (the intersection of its three medians), and its circumcenter (the intersection of the perpendicular bisectors of its three sides, which is also the center of the circumcircle that passes through the three vertices). In an isosceles triangle with exactly two equal sides, these three points are distinct, and (by symmetry) all lie on the symmetry axis of the triangle, from which it follows that the Euler line coincides with the axis of symmetry. The incenter of the triangle also lies on the Euler line, something that is not true for other triangles. If any two of an angle bisector, median, or altitude coincide in a given triangle, that triangle must be isosceles.

Area

The area T of an isosceles triangle can be derived from the formula for its height, and from the general formula for the area of a triangle as half the product of base and height:

T=\frac{b}{4}\sqrt{4a^2-b^2}.

The same area formula can also be derived from Heron's formula for the area of a triangle from its three sides. However, applying Heron's formula directly can be numerically unstable for isosceles triangles with very sharp angles, because of the near-cancellation between the semiperimeter and side length in those triangles.

If the apex angle (\theta) and leg lengths (a) of an isosceles triangle are known, then the area of that triangle is:

T=\frac{1}{2}a^2\sin\theta.

This is a special case of the general formula for the area of a triangle as half the product of two sides times the sine of the included angle.

Perimeter

The perimeter p of an isosceles triangle with equal sides a and base b is just

p = 2a + b.

As in any triangle, the area T and perimeter p are related by the isoperimetric inequality

p^2>12\sqrt{3}T.

This is a strict inequality for isosceles triangles with sides unequal to the base, and becomes an equality for the equilateral triangle. The area, perimeter, and base can also be related to each other by the equation

2pb^3 -p^2b^2 + 16T^2 = 0.

If the base and perimeter are fixed, then this formula determines the area of the resulting isosceles triangle, which is the maximum possible among all triangles with the same base and perimeter. On the other hand, if the area and perimeter are fixed, this formula can be used to recover the base length, but not uniquely: there are in general two distinct isosceles triangles with given area T and perimeter p. When the isoperimetric inequality becomes an equality, there is only one such triangle, which is equilateral.

Angle bisector length

If the two equal sides have length a and the other side has length b, then the internal angle bisector t from one of the two equal-angled vertices satisfies

\frac{2ab}{a+b} > t > \frac{ab\sqrt{2}}{a+b}

as well as

t<\frac{4a}{3};

and conversely, if the latter condition holds, an isosceles triangle parametrized by a and t exists.

The Steiner–Lehmus theorem states that every triangle with two angle bisectors of equal lengths is isosceles. It was formulated in 1840 by C. L. Lehmus. Its other namesake, Jakob Steiner, was one of the first to provide a solution. Although originally formulated only for internal angle bisectors, it works for many (but not all) cases when, instead, two external angle bisectors are equal. The 30-30-120 isosceles triangle makes a boundary case for this variation of the theorem, as it has four equal angle bisectors (two internal, two external).

Radii

Isosceles-triangle-more
Isosceles triangle showing its circumcenter (blue), centroid (red), incenter (green), and symmetry axis (purple)

The inradius and circumradius formulas for an isosceles triangle may be derived from their formulas for arbitrary triangles. The radius of the inscribed circle of an isosceles triangle with side length a, base b, and height h is:

\frac{2ab-b^2}{4h}.

The center of the circle lies on the symmetry axis of the triangle, this distance above the base. An isosceles triangle has the largest possible inscribed circle among the triangles with the same base and apex angle, as well as also having the largest area and perimeter among the same class of triangles.

The radius of the circumscribed circle is:

\frac{a^2}{2h}.

The center of the circle lies on the symmetry axis of the triangle, this distance below the apex.

Applications

In architecture and design

Obtuse isosceles pediment of the Pantheon, Rome
Acute isosceles gable over the Saint-Etienne portal, Notre-Dame de Paris

Isosceles triangles commonly appear in architecture as the shapes of gables and pediments. In ancient Greek architecture and its later imitations, the obtuse isosceles triangle was used; in Gothic architecture this was replaced by the acute isosceles triangle.

In the architecture of the Middle Ages, another isosceles triangle shape became popular: the Egyptian isosceles triangle. This is an isosceles triangle that is acute, but less so than the equilateral triangle; its height is proportional to 5/8 of its base. The Egyptian isosceles triangle was brought back into use in modern architecture by Dutch architect Hendrik Petrus Berlage.

DETAIL VIEW OF MODIFIED WARREN TRUSS WITH VERTICALS. - Union Station Viaduct, Spanning Gaspee, Francis, Promenade and Canal Streets, Providence, Providence County, RI HAER RI,4-PROV,179-12
Detailed view of a modified Warren truss with verticals

Warren truss structures, such as bridges, are commonly arranged in isosceles triangles, although sometimes vertical beams are also included for additional strength. Surfaces tessellated by obtuse isosceles triangles can be used to form deployable structures that have two stable states: an unfolded state in which the surface expands to a cylindrical column, and a folded state in which it folds into a more compact prism shape that can be more easily transported. The same tessellation pattern forms the basis of Yoshimura buckling, a pattern formed when cylindrical surfaces are axially compressed, and of the Schwarz lantern, an example used in mathematics to show that the area of a smooth surface cannot always be accurately approximated by polyhedra converging to the surface.

In graphic design and the decorative arts, isosceles triangles have been a frequent design element in cultures around the world from at least the Early Neolithic to modern times. They are a common design element in flags and heraldry, appearing prominently with a vertical base, for instance, in the flag of Guyana, or with a horizontal base in the flag of Saint Lucia, where they form a stylized image of a mountain island.

They also have been used in designs with religious or mystic significance, for instance in the Sri Yantra of Hindu meditational practice.

See also

Kids robot.svg In Spanish: Triángulo isósceles para niños

kids search engine
Isosceles triangle Facts for Kids. Kiddle Encyclopedia.