Inertia facts for kids
Inertia means an object will continue its current motion until some force causes its speed or direction to change. The term is properly understood as shorthand for "the principle of inertia" as described by Newton in his first law of motion.
After some other definitions, Newton states in his first law of motion:
LAW I. Every object perseveres in its state of rest, or of uniform motion in a right line, unless it is compelled to change that state by forces impressed thereon.
The word "perseveres" is a direct translation from Newton's Latin. Other, less forceful terms such as "to continue" or "to remain" are commonly found in modern textbooks. The modern use follows from some changes in Newton's original mechanics (as stated in the Principia) made by Euler, d'Alembert, and other Cartesians.
The term inertia comes from the Latin word iners, meaning idle, sluggish. The term inertia may also refer to the resistance of any physical object to a change in its velocity. This includes changes to the object's speed or direction of motion. An aspect of this property is the tendency of objects to keep moving in a straight line at a constant speed when no forces act upon them.
Inertia is one of the primary manifestations of mass, which is a quantitative property of physical systems.
In his monumental Philosophiæ Naturalis Principia Mathematica, Isaac Newton defined inertia as a force:
DEFINITION III. The vis insita, or innate force of matter, is a power of resisting by which every body, as much as in it lies, endeavours to persevere in its present state, whether it be of rest or of moving uniformly forward in a right line.
The principle of inertia is one of the fundamental principles in classical physics. It is still used today to describe the motion of objects and how they are affected by the applied forces on them.
Contents
History and development of the concept
Early understanding of inertial motion
John H. Lienhard points out the Mozi – based on a Chinese text from the Warring States period (475–221 BCE) – as having given the first description of inertia. Before the European Renaissance, the prevailing theory of motion in western philosophy was that of Aristotle (335 BCE to 322 BCE). On the surface of the Earth, the inertia property of physical objects is often masked by gravity and the effects of friction and air resistance, both of which tend to decrease the speed of moving objects (commonly to the point of rest). This misled the philosopher Aristotle to believe that objects would move only as long as force was applied to them. Aristotle said that all moving objects (on Earth) eventually come to rest unless an external power (force) continued to move them. Aristotle explained the continued motion of projectiles, after being separated from their projector, as an (itself unexplained) action of the surrounding medium continuing to move the projectile.
Despite its general acceptance, Aristotle's concept of motion was disputed on several occasions by notable philosophers over nearly two millennia. For example, Lucretius (following, presumably, Epicurus) stated that the "default state" of the matter was motion, not stasis (stagnation). In the 6th century, John Philoponus criticized the inconsistency between Aristotle's discussion of projectiles, where the medium keeps projectiles going, and his discussion of the void, where the medium would hinder a body's motion. Philoponus proposed that motion was not maintained by the action of a surrounding medium, but by some property imparted to the object when it was set in motion. Although this was not the modern concept of inertia, for there was still the need for a power to keep a body in motion, it proved a fundamental step in that direction. This view was strongly opposed by Averroes and by many scholastic philosophers who supported Aristotle. However, this view did not go unchallenged in the Islamic world, where Philoponus had several supporters who further developed his ideas.
In the 11th century, Persian polymath Ibn Sina (Avicenna) claimed that a projectile in a vacuum would not stop unless acted upon.
Theory of impetus
In the 14th century, Jean Buridan rejected the notion that a motion-generating property, which he named impetus, dissipated spontaneously. Buridan's position was that a moving object would be arrested by the resistance of the air and the weight of the body which would oppose its impetus. Buridan also maintained that impetus increased with speed; thus, his initial idea of impetus was similar in many ways to the modern concept of momentum. Despite the obvious similarities to more modern ideas of inertia, Buridan saw his theory as only a modification to Aristotle's basic philosophy, maintaining many other peripatetic views, including the belief that there was still a fundamental difference between an object in motion and an object at rest. Buridan also believed that impetus could be not only linear but also circular in nature, causing objects (such as celestial bodies) to move in a circle. Buridan's theory was followed up by his pupil Albert of Saxony (1316–1390) and the Oxford Calculators, who performed various experiments which further undermined the Aristotelian model. Their work in turn was elaborated by Nicole Oresme who pioneered the practice of illustrating the laws of motion with graphs.
Shortly before Galileo's theory of inertia, Giambattista Benedetti modified the growing theory of impetus to involve linear motion alone:
"…[Any] portion of corporeal matter which moves by itself when an impetus has been impressed on it by any external motive force has a natural tendency to move on a rectilinear, not a curved, path."
Benedetti cites the motion of a rock in a sling as an example of the inherent linear motion of objects, forced into circular motion.
Classical inertia
According to Charles Coulston Gillispie, inertia "entered science as a physical consequence of Descartes' geometrization of space-matter, combined with the immutability of God." The first physicist to completely break away from the Aristotelian model of motion was Isaac Beeckman in 1614. The term "inertia" was first introduced by Johannes Kepler in his Epitome Astronomiae Copernicanae (published in three parts from 1617 to 1621); however, the meaning of Kepler's term (which he derived from the Latin word for "idleness" or "laziness") was not quite the same as its modern interpretation. Kepler defined inertia only in terms of resistance to movement, once again based on the presumption that rest was a natural state which did not need explanation. It was not until the later work of Galileo and Newton unified rest and motion in one principle that the term "inertia" could be applied to these concepts as it is today. The principle of inertia, as formulated by Aristotle for "motions in a void", includes that a mundane object tends to resist a change in motion. The Aristotelian division of motion into mundane and celestial became increasingly problematic in the face of the conclusions of Nicolaus Copernicus in the 16th century, who argued that the Earth is never at rest, but is actually in constant motion around the Sun.
Galileo, in his further development of the Copernican model, recognized these problems with the then-accepted nature of motion and, at least partially, as a result, included a restatement of Aristotle's description of motion in a void as a basic physical principle:
A body moving on a level surface will continue in the same direction at a constant speed unless disturbed.
Galileo writes that "all external impediments removed, a heavy body on a spherical surface concentric with the earth will maintain itself in that state in which it has been; if placed in a movement towards the west (for example), it will maintain itself in that movement."
This notion, which is termed "circular inertia" or "horizontal circular inertia" by historians of science, is a precursor to, but distinct from, Newton's notion of rectilinear inertia. For Galileo, a motion is "horizontal" if it does not carry the moving body towards or away from the center of the earth, and for him, "a ship, for instance, having once received some impetus through the tranquil sea, would move continually around our globe without ever stopping." It is also worth noting that Galileo later (in 1632) concluded that based on this initial premise of inertia, it is impossible to tell the difference between a moving object and a stationary one without some outside reference to compare it against. This observation ultimately came to be the basis for Albert Einstein to develop the theory of special relativity.
Concepts of inertia in Galileo's writings would later come to be refined, modified, and codified by Isaac Newton as the first of his Laws of Motion (first published in Newton's work, Philosophiæ Naturalis Principia Mathematica, in 1687):
Every body perseveres in its state of rest, or of uniform motion in a right line, unless it is compelled to change that state by forces impressed thereon.
Despite having defined the concept so elegantly in his laws of motion, Newton did not actually use the term "inertia" to refer to his First Law. In fact, originally he viewed the respective phenomenon as being caused by "innate forces" inherent in matter, which resisted any acceleration. Given this perspective, and borrowing from Kepler, Newton attributed the term "inertia" to mean "the innate force possessed by an object which resists changes in motion"; thus, Newton defined "inertia" to mean the cause of the phenomenon, rather than the phenomenon itself. However, Newton's original ideas of "innate resistive force" were ultimately problematic for a variety of reasons, and thus most physicists no longer think in these terms. As no alternate mechanism has been readily accepted, and it is now generally accepted that there may not be one that we can know, the term "inertia" has come to mean simply the phenomenon itself, rather than any inherent mechanism. Thus, ultimately, "inertia" in modern classical physics has come to be a name for the same phenomenon as described by Newton's First Law of Motion, and the two concepts are now considered to be equivalent.
Relativity
Albert Einstein's theory of special relativity, as proposed in his 1905 paper entitled "On the Electrodynamics of Moving Bodies", was built on the understanding of inertial reference frames developed by Galileo and Newton. While this revolutionary theory did significantly change the meaning of many Newtonian concepts such as mass, energy, and distance, Einstein's concept of inertia remained at first unchanged from Newton's original meaning. However, this resulted in a limitation inherent in special relativity: the principle of relativity could only apply to inertial reference frames. To address this limitation, Einstein developed his general theory of relativity ("The Foundation of the General Theory of Relativity", 1916), which provided a theory including noninertial (accelerated) reference frames.
In general relativity, the concept of inertial motion got a broader meaning. Taking into account general relativity, inertial motion is any movement of a body that is not affected by forces of electrical, magnetic, or other origin, but that is only under the influence of gravitational masses. Physically speaking, this happens to be exactly what a properly functioning three-axis accelerometer is indicating when it doesn't detect any proper acceleration.
Rotational inertia
A quantity related to inertia is rotational inertia (→ moment of inertia), the property that a rotating rigid body maintains its state of uniform rotational motion. Its angular momentum remains unchanged unless an external torque is applied; this is called conservation of angular momentum. Rotational inertia is often considered in relation to a rigid body. For example, a gyroscope uses the property that it resists any change in the axis of rotation.
See also
In Spanish: Inercia para niños
